Re: EGCS...doesn't work...

[Lionel Pinkhard <lionelpi@mweb.co.za>]

Well, I solved the problem. I have both the normal cc and the gcc
compilers, so that's not a problem.

The system I'm compiling with also runs Linux, with an IA32 processor.

Cheers,

Lionel

On Thu, 8 Jun 2000, Jason Brunson wrote:

> it is not the code at all that is causing your headaches.  It is the
> compiler command that is wrong.  You should try compiling using g++, if you
> are running under linux.  I am not sure of the cc equivalent.  I had the
> same problem when i was moving to C++ from C.  I use both the gcc command as
> well as the g++ command.  cc is the C compiler as was gcc.  Therefore I
> venture to say that there is an equivalent to g++ on your system.  You might
> try to run a find on cc1plus and then make sure that path is located in your
> path environment variable.  But you may have the g++ command on your system.
> If so, it should do the job for you.
> 
> Out of curiosity, what type of system and os are you running on?
> 
> Thanks and I hope this helps,
> Jason
> 
> ----- Original Message -----
> From: Lionel Pinkhard <lionelpi@mweb.co.za>
> To: <gameprogrammer@gameprogrammer.com>
> Sent: Thursday, June 08, 2000 3:41 PM
> Subject: Re: EGCS...doesn't work...
> 
> 
> > I'm using the GNU C compiler, and here's the code (simple, but I'm only
> > starting with C++, I usually code normal C):
> >
> > #include <iostream.h>
> >
> > void main() {
> > cout << "hello world";
> > };
> >
> > This is what I type to compile ($ resembles prompt):
> >
> > $ cc hw.cpp
> > cc: installation problem, cannot exec 'cc1plus': No such file or
> > directory.
> >
> > The following procedure with the same compiler, does however work (C, not
> > C++):
> >
> > void main() { /* compiler test */
> > int x, y;
> > printf("Enter two numbers, seperated by colons (end with .):");
> > scanf("%d:%d.", &x, &y);
> > /* let's divide them :-) */
> > printf("%d / %d = %d; %d %% %d = %d\n\r",
> > x, y, x / y, x, y, x % y);
> > exit(0);
> > };
> >
> > This code I compiled by typing:
> >
> > $ cc compiler-test.c
> > $
> >
> > It returned no output, meaning, obviously, that it compiled perfectly. I
> > ran the binary file produced, output was:
> >
> > Enter two number, seperated by colons (end with .): 5, 3
> > 5 / 3 = 1; 5 % 3 = 2;
> > $
> >
> > Ok, I hope this is enough information.
> >
> > Kind regards,
> >
> > Lionel Pinkhard
> >
> > On Thu, 8 Jun 2000, Jason Brunson wrote:
> >
> > > If you don;t mind my asking, what compiler are you using and what does
> the
> > > source code look like.  Also, forgive me, but what is the error that you
> are
> > > receiving?  I am sorry that I had not followed this post better so that
> I
> > > would not have to ask these questions.
> > >
> > > Thanks,
> > > Jason
> > >
> > > ----- Original Message -----
> > > From: Lionel Pinkhard <lionelpi@mweb.co.za>
> > > To: <gameprogrammer@gameprogrammer.com>
> > > Sent: Thursday, June 08, 2000 1:41 PM
> > > Subject: EGCS...doesn't work...
> > >
> > >
> > > > Hi,
> > > >
> > > > I'm sorry, but it looks like I already have egcs (and egcs-c++)
> installed.
> > > > I tried to install them and it told me it's already installed, any
> other
> > > > ideas?
> > > >
> > > > Kind regards,
> > > >
> > > > Lionel Pinkhard
> > > >
> > > > =================================================================
> > > > The GameProgrammer.Com mailing list is for the open discussion
> > > > of any topic related to the art, science, and business of
> > > > programming games. This list is especially tolerant of beginners.
> > > > We were all beginners once
> > > >
> > > > To SUBSCRIBE or UNSUBSCRIBE please visit:
> > > > http://gameprogrammer.com/mailinglist.html
> > >
> > > =================================================================
> > > The GameProgrammer.Com mailing list is for the open discussion
> > > of any topic related to the art, science, and business of
> > > programming games. This list is especially tolerant of beginners.
> > > We were all beginners once
> > >
> > > To SUBSCRIBE or UNSUBSCRIBE please visit:
> > > http://gameprogrammer.com/mailinglist.html
> > >
> >
> > =================================================================
> > The GameProgrammer.Com mailing list is for the open discussion
> > of any topic related to the art, science, and business of
> > programming games. This list is especially tolerant of beginners.
> > We were all beginners once
> >
> > To SUBSCRIBE or UNSUBSCRIBE please visit:
> > http://gameprogrammer.com/mailinglist.html
> 
> =================================================================
> The GameProgrammer.Com mailing list is for the open discussion
> of any topic related to the art, science, and business of
> programming games. This list is especially tolerant of beginners.
> We were all beginners once
> 
> To SUBSCRIBE or UNSUBSCRIBE please visit:
> http://gameprogrammer.com/mailinglist.html
> 

=================================================================
The GameProgrammer.Com mailing list is for the open discussion
of any topic related to the art, science, and business of
programming games. This list is especially tolerant of beginners.
We were all beginners once

To SUBSCRIBE or UNSUBSCRIBE please visit:
http://gameprogrammer.com/mailinglist.html